Cooper bearing part number system
Cooper bearing part number system
|
Example: 01BCP-715-EXIG (7-15/16 inch Pillow lock
01 series, roller bearing in halves, split cartridge housing complete with aluminum triple labyrinth seals, pedestal base and cap. For 7-15/16 inch journal size. Expansion type with grooved inner race.
Part number system
| Prefix |
Suffix |
Definition |
| . |
EX |
EXPANSION TYPE - UP TO AND INCLUDING 6-INCH SHAFT SIZE |
| . |
EXIG |
EXPANSION TYPE - GROOVED INNER RACE STYLE OVER 6-INCH SHAFT SIZE |
| . |
EXIP |
EXPANSION TYPE - PLAIN INNER RACE STYLE OVER 6-INCH SHAFT SIZE |
| . |
EXOG |
EXPANSION TYPE - GROOVED OUTER RACE STYLE |
| . |
GR |
FIXED TYPE - GROOVED INNER AND OUTER RACES FOR BOTH RADIAL AND AXIAL LOADS. |
| 1 |
. |
01 SERIES |
| 2 |
. |
02 SERIES |
| 3 |
. |
03 SERIES |
| ATLS |
. |
ALUMINUM TRIPLE LABYRINTH SEALS. INTERCHANGEABLE BETWEEN THE THREE SERIES. |
| B |
. |
1 SPLIT INNER RACE (2 HALVES) , 2 SPLIT CLAMPING RINGS WITH HIGH TENSILE SCREWS, 1 SPLIT CAGE WITH ROLLERS AND JOINTING CLIPS AND 1 SPLIT OUTER RACE (2 HALVES) . |
| BC |
. |
1 ROLLER BEARING IN HALVES THROUGHOUT, 1 SPLIT CARTRIDGE HOUSING COMPLETE WITH HIGH TENSILE SCREWS AND ONE SET ALUMINUM TRIPLE LABYRINTH SEALS (UP TO 12 INCH SHAFT SIZE) . |
| BCF |
. |
1 ROLLER BEARING IN HALVES, 1 SPLIT CARTRIDGE HOUSING, 1 SET ALUMINUM TRIPLE LABYRINTH SEALS, AND 1 SPLIT FLANGE HOUSING (2 HALVES) WITH HIGH TENSILE SCREWS. |
| BCP |
. |
1 ROLLER BEARING IN HALVES, 1 SPLIT CARTRIDGE HOUSING, 1 SET ALUMINUM TRIPLE LABYRINTH SEALS, 1 PEDESTAL BASE AND CAP WITH HIGH TENSILE SCREWS. |
| C |
. |
CARTRIDGE HOUSING ONLY (2 HALVES) WITH HIGH TENSILE SCREWS BUT NOT INCLUDING SEALS. |
| P |
. |
PEDESTAL BASE AND CAP WITH HIGH TENSILE SCREWS. | |
Bearing >Bearing Numbers > Cooper bearing
