RMS10zz

Bearings >Inch series >RMS10zz

Bearing No.: RMS10 bearing Boundary dimensions(mm) Inner Diameter: 31.75 Outer Diameter: 79.375 Width Open: 22.23 Close: 22.23 Basic load ratings(N) dyn. : 23500 Stat.: 16100 Limiting speeds(rpm ) Grease: 6000 Oil: 10500

The same size can be made of different materials, including,
. Stainless Steel Bearings
. Chrome Steel Bearings
. Carbon Steel Bearings
. Ceramic Bearings

This bearing coms in both a sealed and a shielded version. Please select between the two below. Select 2RS for a sealed bearing or ZZ for a shielded bearing.
This bearing can be found with the following part numbers on it:
RMS10-2RS, RMS10 2RS, RMS10 RS, RMS10RS, RMS10-ZZ, RMS10 ZZ, RMS10ZZ, RMS10 Z

The RMS10-2RS and RMS10-ZZ is a 1/2 ball bearing that is found in many applications. The RMS10-2RS ball bearing has two contact rubber seals one on each side of the ball bearing. The RMS10-ZZ ball bearing has two non-contact metal shields one on each side of the ball bearing. If your application requires a RMS10 ball bearing with only one seal or shield you can get this ball bearing and take one of the shields or seals off. This 1/2 inch ball bearing is high quality and can take electric motor demands if needed.

Certificate:

ISO9001

	Reports provide details of ROHS. Produced by SGS.
	ROHS , SGS